How to DIY repair a car’s dents

It sucks. It sucks so much when you get a dent in your car. It doesn’t just necessarily hurt your wallet. It can also hurt your pride. Sometimes you’re at fault. Sometimes you’re not. 

It hurts if you were at fault because it increases your monthly payments. You got points on your license because you were in an accident.

Article summary

The easiest DIY repair when it comes to repairing a dent in a bumper or panel is to use the dent puller from Gliston. It works on big and small dents!

In addition, we’ll also take a look at some of the following topics:

  • Best alternative products
  • How to work on a door
  • The types you can fix at home

Driving around with a car that has dings in it also just isn’t fun. Heck, some even think it’s totally unacceptable.

car dent repair tool

Whether you’re a person who’s concerned with the financial part or how it looks, it still sucks. Going to a body shop and having them undent the car is no fun. You also know that they’re going to charge you an arm and a leg to do it. 

They’re probably lying about how long the damage takes to repair. There’s a lot you can do at home. 

You will be able to restore your car to its original glory in a lot of instances. It does depend on certain factors. If the damage is serious, you may not be able to get the results you were hoping for without taking it by a professional. 

We’ll be showing you a smart plunger you can use to fix a lot of dents DIY style!

It’s important to know that you won’t be able to fix all dents at your home. So before we get started, let’s take a look at some of your home options.

Time needed: 10 minutes.

How to DIY repair a dent in a car door with a plunger

  1. Go on Amazon and find the right plunger.

    These come in varying qualities, and it’s imperative that you get a good one. If you want recommendations, we put some at the end of the article.plunger on amazon

  2. Evaluate the dent.

    This method is great for certain types of dents, like ones in large flat body panels. If they form a depression, it should also work. Once again, you’re out of luck if the paint is damaged. Inspection of a dent

  3. Follow the instructions.

    Most of the plungers work the same way very much. That is not to say there can’t be small differences that make them work a bit differently.Car door that's damaged

  4. Clean the plunger.

    If you’ve used it before, the plunger may not be clean. It needs to be so before. Debris could scratch the surface and leave you with more problems than you started with. 

  5. Use caution

    It bears noting that it’s important to use caution when using the plunger. You could get hurt if you don’t. Damaged car door

  6. Push it against the bodywork.

    Locate the dent and push the plunger against the body panel in the way the instructions say. 

  7. Make sure there’s no leakage.

    For you to be able to apply the necessary force, you’ll have to make sure there’s no leakage. The plunger won’t stick to the surface if there’s a leak. 

  8. Pull the plunger back.

    You’ll need to apply force at this point. It’s often easier for people that weigh a little bit more.

  9. Repeat the process if needed. 

    There’s no saying that you will be able to pull out the dent on the first try. Give it some more tries. Try to go at it from a different angle. Move the plunger a bit. There may be some tweaking that needs to take place for you to be successful. That’s how you pop a dent out of a car!

Who knew DIY dent removal would be that easy?

If on a Metallic Body Panel

Dent on the side of a car

Let’s take a closer look at what actually happens. Let’s explore the theory of how you can pop out a dent in a car. It’s crucial for getting a better end result.

How are they formed?

Cars are in large part made out of sheet metal. They are what’s formed into the body panels, and they consist of atoms. All these atoms are arranged in an orderly metal.

Consider for a moment what happens when your car is in some sort of an accident. It’s introduced to a lot of force. With such incredible force being introduced, there are two options:

  1. The atoms are displaced, and a dent emerges on the body panels.
  2. Sheet metal is affected so much that a tear happens. The sheets come apart. 

Our mission is to realign those atoms. We want to ensure that the body panel is back in its working order. It is assuming that the sheets have not come apart.

If the right counterforce is applied, there are sometimes situations where damage can be remedied. Dents can be undented. Greatness can be restored. 

Force going one way is what caused the damage in the first place. To restore what has been damaged, you will need to apply adequate force going the opposite direction. 

Deformed beyond a certain level, and you will not be able to remedy the damage. When that happens, home remedies do not work. You will need a pro.

Big or small, only certain dents can be popped out of a car.

You should proceed with getting help from a professional if you don’t feel confident with applying the necessary force. 

We have great things coming up for you. Also, this method can also apply when your travel trailer has been damaged. 

You’ll need a couple of items before you get started. Then you can often make the vehicle look as good as the day it was built.

Here’s a chart with the things you’ll need:

Car dent puller or plungerGloves
Some forcePatience

It’s a simple process. It bears noting that you can use a normal plunger to try and do the job, but the special ones are better.

We will be happy to hear your thoughts

Leave a reply

Passion Plans
Logo
Login/Register access is temporary disabled