Relocate your setup
The position of your PC in a room determines the temperature to a very large extent. If well placed, it can help reduce the chances of overheating.
Ensure that the position of your setup is not blocked by anything to get free air circulation. The fan should have free access to work. It will enable easier and more efficient air supply to the fans. Relocating the PC allows proper movement of air for fans to draw in enough and expel the air for optimal cooling. You can also place it close by a casement air conditioner to ensure there is enough cold air passing by it. Observe whether your system gets colder as a consequence as well.
Clean out dust.
A PC accumulates dust when left stationary for a long time, just like any other equipment. Dust makes it hard for fans to operate by obstructing their movement. You are generally required to clean the dust from the fans.
You can clean the fans by blowing compressed air over them to remove the dust. It is advisable to clean the fans outside the house or in the garage to avoid dust accumulation in the house.
Get a bigger tower.
You might sometimes have your PC at consistently high temperatures even while idling. It shows a lack of air circulating through the fans in the CPU tower. The fans could also be maxed out, leaving no room for additional fans installed in the tower.
When looking for a new tower, look for one that can handle more fans for better circulation. If possible, acquiring one with side-mounted fans is better.
Adjust the fan position.
Proper fan positioning gives your setup an advantage of fast cooling by ensuring that hot air is not trapped in the tower. Top and side fans can be designed to draw in cool air. The bottom and side fans can be designed to expel hot air from the tower.
Boost the fan speed.
Computer fans usually come at a preset speed determined for cooling the PC while in operation. Suppose you intend to use it at enhanced usage levels continuously. You can enhance the fan speed through programs or externally for external fans.
Keep the case closed.
Opening the tower casing might look like a good cooling method. It is not advisable or as effective as expected. Proper fan positioning and a tightly closed tower are much better. There will be a clear pathway for sucking in cool air and blowing out hot air as needed.
Proper cable management
Proper cable management does not only aid in keeping the component cool. It also gives an aesthetical look to the arrangement in the tower. If kept as advised, a neat wire arrangement will be sufficient space for efficient air circulation for optimal operations.
Replace the thermal paste.
Thermal paste is applied between CPU and coolers to help have the temperatures remain low while in use. With continued use, the paste dries off. It loses its cooling capabilities, which is why you need to replace it.
Just underneath, you’ll find the absolute best thermal paste available. If you care about your computer’s performance or durability, this is the product you want.
| Brand | ARCTIC MX-4 |
| Also comes with | Spreader |
| Item Weight | 0.141 ounces |
| Product Dimensions | 1.2 x 2.8 x 5.9 inches |
Pros
- Thermal paste is really the way to go.
- ARCTIC is the go-to brand for thermal paste.
- It will also work for your PS4.
- The durability is excellent.
- It’s still performing well months later.
Cons
- The packaging was questionable.
- The spreader didn’t do much good.
- Some people received their orders without the spreader.
Ranges
The allowable temperature ranges can be easily subdivided into three categories according to their use:
- While idling
- Normal use
- Under high load
While idling, the expected temperature is about a maximum of 45 degrees Celsius or 10 degrees above how hot your room is.
Under normal use, the normal maximum operating temperature is about 60 degrees Celsius or lower. It depends on the condition of your unit.
Models such as the Intel i7 can handle temperatures as high as 95 degrees at full capacity. It is advisable to remain below 85 to reduce the chances of the component getting spoiled fast. If it exceeds 85, look for cooling remedies. You want to ensure your system gets the adequate cooling and protective measures it deserves!
