Supercharger vs Turbo

With the recent shift in global warming awareness, the automobile industry is looking for any way to increase fuel output in their vehicles. Hence the biggest debate of the decade is which forced induction system is better? That’s why this article focuses on Supercharger vs. Turbo. How are they different, and how do they work? Which one should you install in your car to dramatically increase fuel output and keep your engine intact? Keep reading to find out all the details and decide for yourself!

Main differences between a supercharger & turbo

Yes, superchargers and turbo are different. However, both serve the purpose of pushing more air into the engine so that more fuel can also be added and overall fuel economy increases. The main difference between a supercharger & turbo is that superchargers derive their power from the engine, while turbos do this by turning two fans with the exhaust gases of the vehicle.

For a quick summary, take a look at the table below:

SuperchargerTurbo Twin turbo
Functions throughEngineExhaust gasesExhaust gases
Fans12 2
Lag time LowHighHigh
Load on engine High Low Low
Cost$$$$ $$

Continue reading

Table of Contents

How turbos and superchargers work.

Let’s take a closer look at how turbos and superchargers work.

What is a supercharger?

Automobile engineers are obsessed with increasing fuel economy and speed and horsepower in the process. While they can do this with a bigger engine, that won’t solve the problem of minimal costing and isn’t always as efficient. That’s where forced induction systems come in.

A supercharger is a system that forces more air into the engine. By achieving this, more fuel can also be added to the engine. A normal-sized combustion chamber is filled with more fuel than its usual capacity, hence means more horsepower. Let’s see how they do this in the next section.

fast car on the road

How do they work?

Superchargers take their power from the engine’s crankshaft through a belt or chain. Their job is to compress air by rotating rapidly and releasing it into the combustion chamber. By doing so, more fuel can be added to the mix. Remember, more air means more fuel and hence more power!

This belt or chain is connected to the drive gear through a pulley. The job of the drive gear is to rotate and turn the compressor gear. The compressor has the highest priority task of letting maximum air and squeezing it into a small space in the engine. The compressor must spin significantly faster than the engine itself to do this. Superchargers can usually spin anywhere between 50,000 to 65,000 RPM.

What do they do?

At its lowest RPM of 50,000, a supercharger can produce anywhere between 6-9 pounds per square inch. It translates to a whopping 50% more air into the combustion chamber. It means 50% more fuel output. It is great news for sports car enthusiasts and other car owners who want to save more on rising fuel prices and care for the environment in the process.

What are the types?

Superchargers come in many types. The most popular are Roots, ProCharger, and Twin-Screw Chargers.

RootsProChargerTwin- Screw

Roots chargers are among the oldest in the game and have become less popular since they first arrived on the scene. They function by delivering air from one side to the other through spinning lobes of mesh. These are usually so bulky that a car equipped with Roots can be visible from far away due to its muscular hood. Better-performing chargers have replaced them. It’s because they are inefficient in delivering cool air to the engine and waste a lot of energy.

ProCharger is the brand name of the first manufacturer of the centrifugal charger. A centrifugal impeller pulls the air inwards and to the center and is thrown outwards by force into the diffuser. The diffuser’s job is to convert the arriving air into high pressure but low velocity. These are very efficient and give high RPM with easy installation. ProChargers are known for their constant and obstruction-free boosting of the engine. Keep in mind it is a bit noisy when you hit the gas!

Twin-screw chargers probably provide the most speed when you hit the accelerator. This is because of their excellent fuel efficiency and rapid start-up. They also come at a higher price tag than other induction systems due to this selling point. But since it is also similarly attached atop the engine to Roots, it can look bulky when installed.

Pros of Super chargers

  • No lags
  • Increased horsepower immediately
  • Good power boost provided at low RPMs
  • Cost-effective way of increasing fuel economy

Cons of Super chargers

  • Less efficient than turbochargers

What is a turbo?

One major difference between them is how they derive their power. A turbocharger is turbine-driven and derives its power from the exhaust gases produced in the engine. These are most commonly found in heavy-duty construction equipment like trucks and aircraft.

Twin-scroll turbo
Variable geometry turbo
Variable twin scroll turbo
Electric turbo
race car

How do they work?

It consists of two connected parts that fulfill the purpose of letting in more compressed air into the engine for optimum fuel performance. In the first part of the turbine, hot gasses rotate the turbine. In the end, the air is sucked under great pressure. This cool and compressed air is then let out into the engine through the compressor air discharge.

What do they do?

The compressor lets in air ranging between 6 to 8 pounds per square inch. It translates to about 30-40% more air and fuel ratio in the engine. The wasted energy found in the exhaust is taken and fed back into the engine. It makes sure that maximum fuel is also used up instead of being vented out of the exhaust.

Is it possible to turbo and supercharge a car?

Yes. This phenomenon is known as twin-charging, and it’s not exactly a new revelation. Dated back to the 1980s, manufacturers like Nissan and Lancia had experimented with the duo. This system is rarely seen today.

Today this combination has been seen in light-duty vehicles. Twin charging can reduce turbo lags in RPM and boost even more air pressure into the combustion chamber. The best part – the deficiencies of both super and turbo’s can be overcome if they join their forces together. The supercharger is great at boosting the initial startup of the engine. Still, it does tend to lose energy after that. It is known as parasitic loss. However, the main disadvantage of the turbo is the time it takes to get the turbine charged up and running. Luckily, combining the two systems can help overcome these problems.

How does this happen? The supercharger kicks off the process and gives the initial pump of energy which overcomes the turbo lag. After this, the turbine power kicks in and overcomes the parasitic loss of the supercharger. A great-performing engine is created, giving a high fuel ratio.

Some examples of twin-charging

Some automobile manufacturers went the extra mile to get the best of both worlds. Twin-charging was a major feature that automakers wanted to add to their sports cars and luxury cars. Let’s take a look at a few of these examples.

Volvo’s T6 and T8 models come equipped with a twin-charged four-cylinder engine. This gives the T6 models a horsepower of 316, while the T8 usually generates around 400HP. Both series are 2.0 liter- twin-charged.

But if you want to go top-notch, the Zenvo ST1 has a 6.8-liter twin V8 LS1 supercharger. This gives it a total HP of 1100 and the ability to go from 0-60KMPH in 3 seconds flat.

It wasn’t just Volvo and Zenvo that went the extra mile. Rather, Volkswagen also started up with a 1.4-liter twin-charged system. The versions were only available for a limited time and in certain models. Most never made it outside of Europe, but we would have liked to see them in the US market.

Twin-turbo vs. Supercharger

We’ve already been over the working of the supercharger. It has a market rival in the form of the Twin turbocharger. To find out which one is the best match for your vehicle, let us see what a twin-turbo does differently.

What is a twin-turbo?

Not to be confused with a twincharger, it involves using two turbochargers in a single engine to boost air induction. This can be done by laying them out in a certain setup. There are three types of setups: Parallel, Series, and Sequential.

The use of a twin turbocharger can double the fuel performance compared to an engine without a single turbo.

What is the difference?

Now that we know what a twin-turbo does, let us compare its properties with a supercharger. Twin turbos are essentially two chargers combined. This section will cover all the differences between a basic turbocharger and a supercharger.

The first and foremost difference between the two is that turbochargers derive their power from the engine’s exhaust gas. The supercharger derives its energy from the crankshaft. Let us take a look at the other factors.

Adiabatic efficiency

Turbochargers stand winner in the department of adiabatic efficiency. Adiabatic efficiency is inlet and compresses into the engine without adding heat in the process. Even with the best products, superchargers usually result in higher temperature air inlets than turbo ones. The Roots supercharger uses almost 50% of its power to produce heat and not pressure.

The lag

Turbochargers’ main disadvantage lies in their late response time. Their main super-power is the ability to start up without missing a beat. This is because they derive their power directly from the crankshaft. But the gases from the exhaust will take a little bit of time before they get enough of a boost to get the turbines up and running.

The load on the engine

By now, you would have understood that superchargers place a direct load on the engine because they derive their running energy from it. The turbine takes the otherwise wasted energy from the exhaust and drives it back into the engine to recycle it. While this recycling is one of its main advantages, the engine has to work harder on its exhaust system. But the net result is still considerably less than the damage done by superchargers on the engine.

The uses

Turbos are generally more popular amongst the light mainstream vehicles. This is because they have a better fuel-economy FTP75 rating. But it’s the high-performing vehicles that the superchargers are saved for the Chevrolets and race cars.

The cost

Since the supercharged system requires durable components to withstand the bigger energy combustion, these are usually pricier. But since they are usually part of high-end race cars and SUV engines, the trade-off is usually worth it.

Maybe you’re looking to upgrade smaller vehicles with better fuel performance at high speeds at a reasonable cost. Turbos are your go-to. Super’s are usually saved up for more dramatic performance. Even though there is a lag on the turbo throttle, it’s worth waiting a couple of seconds rather than spending extensively on a super.

Which is better?

Now that we have compared the various factors, we can take a final look and decide.

The major benefit of a supercharger is the instantaneous start-up without any lag. These are also good for any novice to install since they are low maintenance and easily attachable to the engine. These are great for smaller engines and increase the performance of high-end luxury cars.

The major advantages of a turbo include the lack of mechanical load due to its drawing power from the exhaust chamber. It also reuses the waste energy and propels it back into the combustion chamber to be used. It also adds little heat to the air that gets fed into the engine.

Along the lines of fuel efficiency, it is the turbocharger that proves better. Not only does it power the most heavy-duty vehicles, but it is also inexpensive to add to your small vehicle. And when you double up with a twin model, it’s icing on the cake!

How much is a twin-turbo?

Since a twin-turbo kit is double the throttle, it’s quite literally double the price too. A good quality These kits from Jim wolf technologies costs about $8,000. Other brands are also in the same range. For instance, the Can-Am Maverick also costs around $7,800.

Compared to a single kit, these twin models are worth much more. A single kit by Rev9 will cost you $2400 on Amazon. So, it’s worth doing the math since a twin can cost you even more than your car!

Can you add it on any car?

Yes, you can add a turbocharger to virtually any car engine and possibly in an inexpensive way. But it may not be as easy as you think. The trick is to find the right match for your engine.

While you may have seen some in garage sales for $100, it’s important to remember the cons of the older models. The main factors to look out for when you purchase one for your vehicle are the wheel trims and the design of the bearing.

Garrett GT turbos have seen a dramatic drop in the number of components from a whopping 54 to a mere 29. That means fewer chances of a breakdown due to the non-functioning of any one part, but it also means lighter weight. You should also look at the bearings to make sure there are no chances of oil leaking and ruining your engine.

race car driver

That’s it, folks!

We hope you’ve made up your mind about turbo and superchargers now that you’ve read all about their cost and performance. Depending on your vehicle and your speed requirements, you can choose the best match for your engine. If you decide to go full engineer and install an induction system on your own, get some professional advice beforehand. Make sure to DIY and drive safe!

We will be happy to hear your thoughts

Leave a reply

Passion Plans
Login/Register access is temporary disabled